EN
X120Mn12 Manganese Plates
X120Mn12 manganese steel plate (also called manganese hard steel or hard manganese steel plate) has the characteristics of significantly increasing the original low hardness and tensile strength of the cold-worked layer in the quenched state, which is achieved by intensive cold working, but without adversely affecting the original very high durability.
- Översikt
- Liknande produkter...
Beskrivning:
X120Mn12 manganese steel plate (also called manganese hard steel or hard manganese steel plate) has the characteristics of significantly increasing the original low hardness and tensile strength of the cold-worked layer in the quenched state, which is achieved by intensive cold working, but without adversely affecting the original very high durability. Cold working greatly improves the wear resistance of X120MN12 steel plate. X120MN12 grade manganese steel plate can be flanged, bent and perforated due to its high durability.
X120Mn12 steel is a high manganese steel plate with an austenitic structure, which is characterized by a high manganese content (about 12%) and a high carbon content (average 1.00-1.20%). The concentration range of manganese and carbon depends on the equivalent of different source grades.
Dessa steel plates are classified according to material, standard grade, thickness, width and length, and are made into two different forms - sheets and plates.
Specifikationer:
|
Produktnamn |
High Manganese steel plate |
|
Material |
Din 1.3401, K700, Mn13, X120Mn12 |
|
Varumärke |
TISCO, Bao Steel |
|
Standard |
DIN, GB, ISO, JIS, AISI, ASTM |
|
Längd |
2 till 7 m |
|
Bredd |
1 till 2 m |
|
Tjocklek |
3mm till 50mm |
Motsvarande betyg av X120Mn12:
|
DIN |
AISI |
BS |
AFNOR |
UNI |
|
1.3401 |
En 128 |
BW 10 |
Z 120 M 12 |
X 120 Mn 12 |
X120Mn12 Manganese Steel Plate Chemical Composition:
|
C |
Mn |
Si |
P |
S |
Cr |
|
1.10 - 1.30 |
11.00 - 14.00 |
0.25 - 0.50 |
≤ 0.100 |
≤ 0.040 |
1.50 |
X120Mn12 Mechanical Properties at Room Temperature:
|
Grade |
Draghållfasthet |
Sträckgräns |
Förlängning |
Shock Absorption (Water) |
Hårdhet |
|
X120Mn12 |
880 - 1130 MPa |
≥ 410 MPa |
≥ 40% |
124 J (at room temperature) |
≤ 229 HB |
Funktioner:
Surface hardening during grinding and crushing, good ductility, impact resistance and the ability to withstand dynamic loads are basic criteria for selecting and using steel.
High manganese steel is non-magnetic steel after proper heat treatment.
High hardness of the material in the supersaturated state - about 500 HBW.
Program:
X120Mn12 high manganese steel plates are widely used in industrial and general purposes, such as crusher jaws, electric shovel bolts, impact mills, centrifugal mills, protective grilles, doors, crusher jaw inserts, electric shovel connectors, clamping teeth, cladding and safety plates.
Produktförpackning:
Vi använder de säkraste och mest effektiva sätten att förpacka för alla typer av leveranser.
FAQ:
1.F: Hur länge kan leveransen ske?
S: För lagerprodukter, kommer att göra leveranser inom 5-7 dagar efter mottagande av insättning; för produkter behöver ny produktion för vanliga material, gör vanligtvis leveranser inom 10-15 dagar; för produkter behöver ny produktion för speciella och sällsynta material, behöver vanligtvis 20-30 dagar för att göra leverans.
2.F: Kan jag besöka din fabrik?
A: Visst, välkommen att besöka vår fabrik när som helst.
3. F: Var är du?
S: Anyang i Henanprovinsen.
4.F: Vilka certifieringar har dina produkter?
S: Vi har ISO 9001, BV, SGS, CE, TUV och andra certifieringar.
5.F: Vilka är dina betalningsvillkor?
A:30% T/T insättning i förskott, 70% T/T saldo inom 5 dagar efter B/L kopia, 100%. Oåterkallelig L/C vid synen, 100% Oåterkallelig L/C efter mottagande B/L 30-120 dagar, O/A.
Märka:
X120Mn12 Manganese Plates, China High Mn Wear-Resistant Steel Manufacturers, Suppliers, Factory, Wear-Corrosion-Resistant Steel,High-Class Hardened And Tempered Wear-Resistant Steel,High Ductility Brittle Crack Arrest Wear-Resistant Steel,Super Wear-Resistant Steel,High-Temperature And Wear Resistant Steel,High Mn Wear-Resistant Steel,Low Yield Ratio Wear-Resistant Steel,Mn13 High Manganese Steel Plate
