EN
X120Mn12 Manganese Plates
X120Mn12 manganese steel plate (also called manganese hard steel or hard manganese steel plate) has the characteristics of significantly increasing the original low hardness and tensile strength of the cold-worked layer in the quenched state, which is achieved by intensive cold working, but without adversely affecting the original very high durability.
- преглед
- Слично
opis:
X120Mn12 manganese steel plate (also called manganese hard steel or hard manganese steel plate) has the characteristics of significantly increasing the original low hardness and tensile strength of the cold-worked layer in the quenched state, which is achieved by intensive cold working, but without adversely affecting the original very high durability. Cold working greatly improves the wear resistance of X120MN12 steel plate. X120MN12 grade manganese steel plate can be flanged, bent and perforated due to its high durability.
X120Mn12 steel is a high manganese steel plate with an austenitic structure, which is characterized by a high manganese content (about 12%) and a high carbon content (average 1.00-1.20%). The concentration range of manganese and carbon depends on the equivalent of different source grades.
Ово steel plates are classified according to material, standard grade, thickness, width and length, and are made into two different forms - sheets and plates.
specifikacije:
|
Назив производа |
High Manganese steel plate |
|
Материјал |
Din 1.3401, K700, Mn13, X120Mn12 |
|
Марка |
TISCO, Bao Steel |
|
стандард |
DIN, GB, ISO, JIS, AISI, ASTM |
|
Дужина |
2м до 7м |
|
Ширина |
1м до 2м |
|
Дебљина |
КСНУМКСмм да КСНУМКСмм |
Еквивалентне оцене Кс120Мн12:
|
ДИН |
АИСИ |
BS |
АФНОР |
UNI |
|
1.3401 |
КСНУМКС |
БВ 10 |
Z 120 M 12 |
X 120 Mn 12 |
X120Mn12 Manganese Steel Plate Chemical Composition:
|
C |
Mn |
Si |
P |
S |
Cr |
|
1.10 - 1.30 |
11.00 - 14.00 |
0.25 - 0.50 |
≤КСНУМКС |
≤КСНУМКС |
1.50 |
Кс120Мн12 Mechanical Properties at Room Temperature:
|
Разред |
Затезна чврстоћа |
Снага приноса |
Издужење |
Shock Absorption (Water) |
Чврстоћа |
|
Кс120Мн12 |
880 – 1130 МПа |
≥ 410 МПа |
≥ КСНУМКС% |
124 J (at room temperature) |
≤ 229 ХБ |
Карактеристике:
Surface hardening during grinding and crushing, good ductility, impact resistance and the ability to withstand dynamic loads are basic criteria for selecting and using steel.
High manganese steel is non-magnetic steel after proper heat treatment.
High hardness of the material in the supersaturated state - about 500 HBW.
Примена:
X120Mn12 high manganese steel plates are widely used in industrial and general purposes, such as crusher jaws, electric shovel bolts, impact mills, centrifugal mills, protective grilles, doors, crusher jaw inserts, electric shovel connectors, clamping teeth, cladding and safety plates.
Паковање производа:
Користимо најсигурније и најефикасније начине паковања за све врсте испорука.
Питања:
1.П: Колико дуго се може извршити испорука?
О: За производе на залихама, извршиће пошиљке у року од 5-7 дана након пријема депозита; за производе је потребна нова производња за уобичајене материјале, обично се испоручују за 10-15 дана; за производе потребна је нова производња за посебне и ретке материјале, обично је потребно 20-30 дана за испоруку.
2.П: Могу ли да посетим вашу фабрику?
О: Свакако, добродошли у посету нашој фабрици у било ком тренутку.
3.П: Где си?
О: Анианг у провинцији Хенан.
4.П: Које сертификате имају ваши производи?
О: Имамо ИСО 9001, БВ, СГС, ЦЕ, ТУВ и друге сертификате.
5.П: Који су ваши услови плаћања?
А: 30% Т/Т депозит унапред, 70% Т/Т салдо у року од 5 дана након Б/Л копије, 100%. Неопозиви Л/Ц по виђењу, 100% Неопозиви Л/Ц након пријема Б/Л 30-120 дана, О/А.
таг:
X120Mn12 Manganese Plates, China High Mn Wear-Resistant Steel Manufacturers, Suppliers, Factory, Wear-Corrosion-Resistant Steel,High-Class Hardened And Tempered Wear-Resistant Steel,High Ductility Brittle Crack Arrest Wear-Resistant Steel,Super Wear-Resistant Steel,High-Temperature And Wear Resistant Steel,High Mn Wear-Resistant Steel,Low Yield Ratio Wear-Resistant Steel,Мн13 High Manganese Steel Plate
