Све категорије
q235a carbon steel pipe-42

Цев од угљеничног челика

Početna >  Proizvodi >  царбон стеел >  Цев од угљеничног челика

СВИ ПРОИЗВОДИ

К235А цев од угљеничног челика

Q235A carbon steel is the most widely used common carbon structural steel in my country, belonging to the low carbon steel category specified in the GB/T 700 standard. The "Q" in the steel grade represents the yield strength, "235" indicates that its lower limit of yield strength is 235MPa, and "A" refers to the A grade in the quality grade, which has relatively low requirements for impact toughness.

   

☎  +86 17611015797 (ВхатсАпп) 

📧   инфо@стеелгроупс.цом 

  • преглед
  • Слично
К235А цев од угљеничног челика
К235А цев од угљеничног челика
К235А цев од угљеничног челика
К235А цев од угљеничног челика
К235А цев од угљеничног челика
К235А цев од угљеничног челика

🔵 opis:

 

Q235A carbon steel is the most widely used common carbon structural steel in my country, belonging to the low carbon steel category specified in the GB/T 700 standard. The "Q" in the steel grade represents the yield strength, "235" indicates that its lower limit of yield strength is 235MPa, and "A" refers to the A grade in the quality grade, which has relatively low requirements for impact toughness.

 

In practical applications, the welding performance of Q235A is particularly outstanding, and a variety of welding processes such as conventional arc welding and gas shielded welding can be used, and no complex heat treatment is required after welding. In the cold bending test, the 180° bending test is qualified, and the bending core diameter is allowed to be equal to the thickness of the specimen, which provides the possibility for complex forming of steel structural parts. However, it should be noted that since the impact toughness of grade A steel is not guaranteed, it should be used with caution when the working temperature is below 0℃. If necessary, higher grades of Q235B or Q235D can be selected.

 

According to national standard requirements, the supply state of Q235A is usually hot-rolled, and the surface can present unique iron oxide characteristics. In terms of quality control, in addition to conventional mechanical property testing, fracture inspection and low-magnification microstructure inspection are also required to ensure the internal quality of the material.

 

Compared with similar materials, Q235A has obvious advantages in cost-effectiveness. Its market price is usually about 15%-20% lower than that of high-quality carbon structural steel, but its corrosion resistance and low-temperature toughness are relatively weak, and the surface usually requires protective treatment such as galvanizing and painting.

 

Q235A Carbon Steel Chemical Composition:

Ц %

Си%

Мн %

П %

С %

ККСНУМКСА

≤КСНУМКС

≤КСНУМКС

≤КСНУМКС

≤КСНУМКС

≤КСНУМКС

 

Q235A Carbon Steel Pipe Mechanical Properties:

Дебљина

Јачина приноса (Мпа)

Затезна чврстоћа

Издужење

Ударна енергија

(Мм)

(МПа)

(%)

Минимална 

≤ КСНУМКС

235

370-500

26

20

КСНУМКСЈ

> 16-40

225

370-500

25

20

КСНУМКСЈ

> КСНУМКС

215

370-500

24

20

КСНУМКСЈ

The min impact energy is longitudinal energy

 

🔵 Паковање производа:

carbon steel pipe packing.jpg

 

таг:

 

Q235A Carbon Steel Pipe, China Carbon Steel PipeManufacturers, Suppliers, Factory, Carbon Steel, Carbon steel Tube,Carbon Steel Pipe,К235 Цев од угљеничног челика

Добиј бесплатан цитат

Наш представник ће вас ускоро контактирати.
Имеjл
мобилни
Ime
Име компаније
Poruka
0/1000
q235a carbon steel pipe-66
Newsletter
Молимо оставите поруку са нама