EN
Jeklena plošča, odporna proti obrabi NM450HiTemp
NM450HiTemp is a high-temperature wear-resistant steel. The tensile strength of this product at 300℃-600℃ is significantly better than that of ordinary wear-resistant steel. At 500℃, the tensile strength is still 907MPa, which is 1.5 times that of the same level of wear-resistant steel. At 600℃, the tensile strength is 3 times that of NM450.
- Pregled
- Podobni izdelki
Opis:
Traditional wear-resistant steel is sensitive to temperature. When the temperature is higher than 200℃, the hardness becomes weaker. However, for high temperature, when the temperature reaches 500℃, the hardness of NM450HiTemp remains unchanged.
According to the change chart below, it can be clearly seen that NM450HiTemp is a high-temperature wear-resistant steel. The tensile strength of this product at 300℃-600℃ is significantly better than that of ordinary wear-resistant steel. At 500℃, the tensile strength is still 907MPa, which is 1.5 times that of the same level of wear-resistant steel. At 600℃, the tensile strength is 3 times that of NM450.
The change chart above shows:
The tensile strength of NM450HiTemp decreases relatively slowly after being kept at 300℃-500℃ for 48h. The tensile strength can still reach 1212MPa after being kept at 500℃ for 48h.
Tehnični podatki:
|
ime izdelka |
Plošča iz jeklene pločevine, odporna proti obrabi |
|
Jeklene stopnje |
NM300,NM300TP,NM360, NM400, NM400E,NM450,NM450E, NM500, NM550, NM500E,NM600,NM450HiTemp |
|
Standardna |
GB, ASTM, JIS, DIN, ASTM |
|
Debelina |
2mm-300mm |
|
Širina |
500-2500mm |
|
dolžina |
1000mm-12000mm ali glede na posebno zahtevo stranke |
|
Toleranca |
Debelina: +/- 0.02 mm, širina: +/- 2 mm |
|
Čas dostave |
7-15 delovnih dni po prejemu 30% pologa |
|
certificiranje |
BV, SGS, CE, TUV |
|
paket |
Sveženj z jeklenim trakom, kontejnerski prevoz |
NM450HiTemp Mechanical Property:
|
Jekleni razred |
Yield strength （Typical）MPa |
Tensile strength（Typical）MPa |
Elongation（Typical）A50% |
Brinell Hardness（Typical）HBW |
Available specification ,mm |
|
NM450HiTemp |
≥1100（1260） |
≥1300（1540） |
≥7（15.6） |
≥420（456） |
3-25 * 1000-2050 |
Prijave:
NM450HiTemp is mainly suitable for diamond heating rollers and recycled material heating rollers.
Pakiranje izdelka:
Za vse vrste dostave uporabljamo najvarnejše in najučinkovitejše načine pakiranja.
Pogosta vprašanja:
1.Q: Kako dolgo lahko opravite dostavo?
O: Za izdelke na zalogi bodo pošiljke poslane v 5-7 dneh po prejemu pologa; za izdelke potrebujejo novo proizvodnjo za običajne materiale, običajno opravijo pošiljke v 10-15 dneh; za izdelke potrebujejo novo proizvodnjo za posebne in redke materiale, običajno potrebujejo 20-30 dni za pošiljanje.
2.Q: Ali lahko obiščem vašo tovarno?
O: Seveda, dobrodošli, da kadar koli obiščete našo tovarno.
3.Q: Kje si?
O: Anyang v provinci Henan.
4.V: Kakšne certifikate imajo vaši izdelki?
O: Imamo ISO 9001, BV, SGS, CE, TUV in druge certifikate.
5.Q: Kakšni so vaši plačilni pogoji?
A: 30% T/T depozit vnaprej, 70% T/T stanje v 5 dneh po B/L kopiji, 100%.Nepreklicni L/C na vpogled, 100% nepreklicni L/C po prejemu B/L 30-120 dni, O/A.
Oznaka:
NM450HiTemp Wear Resistant Steel Plate, China Abrasion Resistant Steel Sheet Manufacturers, Suppliers, Factory, NM300Wear Resistant SteelSheet, NM360Wear Resistant SteelSheet, NM500Wear Resistant SteelSheet,High Wear Resistance And High Toughness,High Quality,Jeklena plošča, odporna proti obrabi NM600,NM300TP,NM400,NM400E,NM450,NM450E,NM500,NM500E,NM360
