EN
Țeavă din oțel carbon Q235C
Q235C carbon steel pipe belongs to the higher quality grade material in the Q235 series. Compared with Q235A and Q235B, its core advantage lies in stricter chemical composition control and better low-temperature impact toughness.
"Q" in the grade represents yield strength, "235" means that the lower limit of yield strength is 235MPa, and "C" indicates that its quality grade is C grade, which must meet the impact toughness requirements under 0℃ conditions, significantly improving the service safety of the material in low temperature environments.
- Descriere
- Produse asemănătoare
Descriere:
Q235C carbon steel pipe belongs to the higher quality grade material in the Q235 series. Compared with Q235A and Q235B, its core advantage lies in stricter chemical composition control and better low-temperature impact toughness. "Q" in the grade represents yield strength, "235" means that the lower limit of yield strength is 235MPa, and "C" indicates that its quality grade is C grade, which must meet the impact toughness requirements under 0℃ conditions, significantly improving the service safety of the material in low temperature environments.
Q235C has stronger environmental adaptability. Its welding performance is better than that of grade A and B steels. It can be welded by submerged arc welding, gas shielded welding and other processes. The preheating temperature before welding is relatively low, and the embrittlement tendency of the heat affected zone after welding is small. It is often used in key welding parts such as pressure vessel shells and port machinery components. In terms of cold processing performance, the material can be formed by cold bending, stamping and other processes. The 180° cold bending test with a bending core diameter equal to the thickness of the specimen is qualified, meeting the manufacturing needs of complex structural parts. According to the standard, the lower limit of Q235C's working temperature can reach -20℃ (specific requirements need to be combined with design specifications), and it is widely used in outdoor steel structures, refrigeration equipment brackets and other fields in cold northern regions.
According to national standards, Q235C is usually supplied in a hot-rolled state, and iron oxide is allowed to exist on the surface. It can also be sandblasted or pickled according to demand. In addition to conventional tensile and bending tests, quality inspection must perform a 0℃ impact test, and ultrasonic flaw detection or magnetic particle testing must be performed to ensure that there are no major defects inside the material. Compared with Q235B, its production cost increases by about 8%-12%, but it still has an economic advantage compared to Q235D steel that requires -20℃ impact performance guarantee.
Specificații:
|
numele produsului |
Țeavă din oțel carbon Q235C |
|
Standard |
AISI ASTM JIS BS DIN GB |
|
Metoda de măsurare |
Laminate la cald |
|
Grosime |
0.5-40 mm |
|
OD |
15-300mm |
|
Lungime |
5.8-12M |
|
Eşantion |
Probă în mod liber |
|
Împachetarea Comenzii |
Ambalare standard navigabilă sau după cum este necesar |
|
Plată |
T/T; L/C; |
Q235C Carbon Steel Pipe Chemical Composition:
|
Calitate |
C % |
Si% |
Mn % |
P % |
S % |
|
Q235C |
≤ 0.17 |
≤ 0.35 |
≤ 1.4 |
≤ 0.040 |
≤ 0.040 |
Q235C Carbon Steel Mechanical Property:
|
Grosime |
Limita de curgere (Mpa) |
Forța de tracțiune |
elongație |
Energie de impact |
|
|
(Mm) |
(MPa) |
(%) |
Min |
||
|
≤ 16 |
235 |
370-500 |
26 |
0 |
27J |
|
> 16-40 |
225 |
370-500 |
25 |
0 |
27J |
|
> 40 |
215 |
370-500 |
24 |
0 |
27J |
|
Energia minimă de impact este energia longitudinală |
|||||
Ambalare produs:
Standard packing or according to customer requirements.
Întrebări frecvente:
1. Î: Cât timp se poate face livrarea?
R: Pentru produsele stoc, va face expedieri în 5-7 zile de la primirea depozitului; pentru produsele au nevoie de producție nouă pentru materiale obișnuite, de obicei faceți expedieri în 10-15 zile; pentru produsele au nevoie de producție nouă pentru materiale speciale și rare, de obicei au nevoie de 20-30 de zile pentru a efectua expedierea.
2. Î: Pot să vă vizitez fabrica?
R: Sigur, bine ați venit în orice moment la fabrica noastră.
3. Î: Unde ești?
R: Anyang în provincia Henan.
4. Î: Ce certificări au produsele dumneavoastră?
R: Avem certificări ISO 9001, BV, SGS, CE, TUV și alte certificări.
5. Î: Care sunt condițiile dvs. de plată?
A: 30% T/T depozit în avans, 70% T/T sold în 5 zile după copie B/L, 100%. L/C irevocabil la vedere, 100% L/C irevocabil după primirea B/L 30-120 zile, O/A.
Etichetă:
Q235C Carbon Steel Pipe, China Carbon Steel PipeManufacturers, Suppliers, Factory, Carbon Steel, Carbon steel Tube,Carbon Steel Pipe,Q235 Teava din otel carbon,Q235A Teava din otel carbon,Q235B Teava din otel carbon
