EN
X120Mn12 Pjanċi tal-manganiż
X120Mn12 manganese steel plate (also called manganese hard steel or hard manganese steel plate) has the characteristics of significantly increasing the original low hardness and tensile strength of the cold-worked layer in the quenched state, which is achieved by intensive cold working, but without adversely affecting the original very high durability.
- Ħarsa ġenerali
- Prodotti relatati
deskrizzjoni:
X120Mn12 manganese steel plate (also called manganese hard steel or hard manganese steel plate) has the characteristics of significantly increasing the original low hardness and tensile strength of the cold-worked layer in the quenched state, which is achieved by intensive cold working, but without adversely affecting the original very high durability. Cold working greatly improves the wear resistance of X120MN12 steel plate. X120MN12 grade manganese steel plate can be flanged, bent and perforated due to its high durability.
X120Mn12 steel is a high manganese steel plate with an austenitic structure, which is characterized by a high manganese content (about 12%) and a high carbon content (average 1.00-1.20%). The concentration range of manganese and carbon depends on the equivalent of different source grades.
dawn steel plates are classified according to material, standard grade, thickness, width and length, and are made into two different forms - sheets and plates.
speċifikazzjonijiet:
|
Isem tal-prodott |
High Manganese steel plate |
|
materjal |
Din 1.3401, K700, Mn13, X120Mn12 |
|
Tip |
TISCO, Bao Steel |
|
standard |
DIN, GB, ISO, JIS, AISI, ASTM |
|
Tul |
2m sa 7m |
|
Wisa |
1m sa 2m |
|
Ħxuna |
3mm li 50mm |
Gradi Ekwivalenti ta' X120Mn12:
|
DIN |
AISI |
BS |
AFNOR |
UNI |
|
1.3401 |
A 128 |
BW 10 |
Z 120 M 12 |
X 120 Mn 12 |
X120Mn12 Manganese Steel Plate Chemical Composition:
|
C |
Mn |
Si |
P |
S |
Cr |
|
1.10 - 1.30 |
11.00 - 14.00 |
0.25 - 0.50 |
≤ 0.100 |
≤ 0.040 |
1.50 |
X120Mn12 Mechanical Properties at Room Temperature:
|
Grad |
Tensile |
Qawwa tar-Rendiment |
Elongazzjoni |
Shock Absorption (Water) |
Ebusija |
|
X120Mn12 |
880 - 1130 MPa |
≥ 410 MPa |
≥ 40% |
124 J (at room temperature) |
≤ 229 HB |
karatteristiċi:
Surface hardening during grinding and crushing, good ductility, impact resistance and the ability to withstand dynamic loads are basic criteria for selecting and using steel.
High manganese steel is non-magnetic steel after proper heat treatment.
High hardness of the material in the supersaturated state - about 500 HBW.
Applikazzjonijiet:
X120Mn12 high manganese steel plates are widely used in industrial and general purposes, such as crusher jaws, electric shovel bolts, impact mills, centrifugal mills, protective grilles, doors, crusher jaw inserts, electric shovel connectors, clamping teeth, cladding and safety plates.
Ippakkjar tal-Prodott:
Aħna nużaw l-aktar modi sikuri u effettivi ta 'ppakkjar għat-tipi kollha ta' kunsinni.
FAQ:
1.Q: Kemm idum jista 'jagħmel il-kunsinna?
A: Għal prodotti tal-istokk, se tagħmel vjeġġi fi 5-7 ijiem wara li tirċievi d-depożitu; għal prodotti jeħtieġu produzzjoni ġdida għal materjali komuni, ġeneralment jagħmlu vjeġġi f'10-15-il jum; għall-prodotti jeħtieġu produzzjoni ġdida għal materjali speċjali u rari, ġeneralment jeħtieġu 20-30 jum biex jagħmlu vjeġġ.
2.Q:Can I nżur il-fabbrika tiegħek?
A: Sure, merħba li żżur il-fabbrika tagħna fi kwalunkwe ħin.
3.Q:fejn int?
A: Anyang fil-Provinċja ta 'Henan.
4.Q: Liema ċertifikazzjonijiet għandhom il-prodotti tiegħek?
A: Għandna ISO 9001, BV, SGS, CE, TUV u ċertifikazzjonijiet oħra.
5.Q:What huma tiegħek termini ta ' ħlas?
A:30% T/T depożitu bil-quddiem, 70% T/T bilanċ fi żmien 5 ijiem wara kopja B/L, 100%. Irrevokabbli L/C fil-vista, 100% Irrevokabbli L/C wara li tirċievi B/L 30-120 jiem, O/A.
Tabella:
X120Mn12 Manganese Plates, China High Mn Wear-Resistant Steel Manufacturers, Suppliers, Factory, Wear-Corrosion-Resistant Steel,High-Class Hardened And Tempered Wear-Resistant Steel,High Ductility Brittle Crack Arrest Wear-Resistant Steel,Super Wear-Resistant Steel,High-Temperature And Wear Resistant Steel,High Mn Wear-Resistant Steel,Low Yield Ratio Wear-Resistant Steel,Mn13 High Manganese Steel Plate
