EN
NM450Tuf nusidėvėjimui atspari plokštė
NM450Tuf high-toughness crack-resistant and wear-resistant steel ensures that the wear resistance remains unchanged, while the impact energy at -20℃ can reach 110J.
The low-temperature toughness is more than twice that of the same level of wear-resistant steel and 4 times higher than the national standard requirements. It can serve in an environment of -60℃, and the wear resistance and service life are doubled without increasing the cost of processing technology such as welding.
- Apžvalga
- Susiję produktai
- High Hardness and Excellent Wear Resistance:The surface hardness of NM450Tuf wear-resistant plate reaches 450HB. Hardness directly determines the wear resistance of the material. The higher the hardness, the stronger the wear resistance. Therefore, NM450Tuf wear-resistant plate can effectively cope with long-term wear and friction. In high-wear working conditions such as mining, crushing and transportation, it can greatly reduce the wear degree of equipment and reduce the replacement frequency, thereby improving production efficiency.
- Super Strong Impact Resistance:Through special smelting and treatment processes, NM450Tuf wear-resistant plate can still maintain high toughness under high impact loads to avoid cracks.
- Puikus terminis stabilumas:NM450Tuf wear-resistant plate is not only suitable for high-temperature working environment, but also has excellent thermal stability. Many wear-resistant materials are prone to performance degradation or even brittle fracture when encountering sudden temperature changes, but NM450Tuf wear-resistant plate can effectively withstand temperature fluctuations and maintain stable working performance.
Aprašymas:
NM450Tuf wear-resistant plate is an ultra-high atsparus dilimui steel plate, which belongs to low-alloy high-strength steel with a surface hardness of 450HB (Brinell hardness). It is developed based on the traditional wear-resistant plate NM450 steel plate, and adopts a series of special smelting processes to enhance its performance in high-wear and high-impact environments, especially in terms of impact resistance, toughness and thermal stability.
NM450Tuf wear-resistant plate is not only superior to general wear-resistant materials in hardness, but its high strength and impact resistance enable it to work normally in environments that many traditional wear-resistant steel plates cannot withstand, especially under strong impact and high load conditions, it is more stable.
NM450Tuf specifikacijos:
|
Plieno markės |
Išeigos stiprumas (MPa) |
Tempiamasis stipris (MPa) |
Pailgėjimas (A50 %) |
Brinelio kietumas (HBW) |
Poveikio energija (KV2, J) |
Galimos specifikacijos (mm) |
|
NM450Tuf |
≥ 1100 (1290) |
≥ 1300 (1540) |
≥ 7 (16.5) |
420-480 (453) |
≥ 48 (106) |
3.0–25.0 * 1000–2050 |
Main Characteristics of NM450Tuf Wear-resistant Plate:
Programos:
NM450Tuf yra plačiai naudojamas kasybos, metalurgijos, statybinių mašinų, logistikos ir transporto, žemės ūkio mašinų ir kitose srityse.
Produkto pakavimas:
Visų rūšių pristatymams naudojame pačius saugiausius ir efektyviausius pakavimo būdus.
DUK:
1.Q: Kiek laiko galima pristatyti?
A: sandėlyje esantys produktai išsiųs per 5–7 dienas nuo užstato gavimo; gaminiams reikia naujos gamybos įprastoms medžiagoms, paprastai pristatoma per 10-15 dienų; gaminiams reikia naujos gamybos specialioms ir retoms medžiagoms, paprastai siuntimui reikia 20–30 dienų.
2.Kl.: Ar galiu apsilankyti jūsų gamykloje?
A: Žinoma, kviečiame apsilankyti mūsų gamykloje bet kuriuo metu.
3.K: Kur tu esi?
A: Anyangas Henano provincijoje.
4.Q. Kokius sertifikatus turi jūsų produktai?
A: Mes turime ISO 9001, BV, SGS, CE, TUV ir kitus sertifikatus.
5.Q: Kokios yra jūsų mokėjimo sąlygos?
A: 30% T/T užstatas iš anksto, 70% T/T likutis per 5 dienas po B/L kopijavimo, 100 % Neatšaukiamas L/C apžiūrėjus, 100 % neatšaukiamas L/C gavus B/L 30-120 dienos, O/A.
tag:
NM450Tuf, Kinija Didelio lankstumo trapaus įtrūkimus stabdančio dilimui atsparaus plieno gamintojai, tiekėjai, gamyklos, dilimui atsparaus plieno, aukštos klasės grūdinto ir grūdinto dilimui atsparaus plieno,Didelio lankstumo trapus įtrūkimus stabdantis dilimui atsparus plienas,ypač atsparus dilimui plienas, aukštai temperatūrai ir dėvėjimuisi atsparus plienas, aukštai Mn nusidėvėjimui atsparus plienas, mažo išeigos koeficiento dilimui atsparus plienas,NM400Tuf
