EN
NM450HiTemp Wear Resistant Steel Plate
NM450HiTemp is a high-temperature wear-resistant steel. The tensile strength of this product at 300℃-600℃ is significantly better than that of ordinary wear-resistant steel. At 500℃, the tensile strength is still 907MPa, which is 1.5 times that of the same level of wear-resistant steel. At 600℃, the tensile strength is 3 times that of NM450.
- Ülevaade
- Seotud tooted
Kirjeldus:
Traditional wear-resistant steel is sensitive to temperature. When the temperature is higher than 200℃, the hardness becomes weaker. However, for high temperature, when the temperature reaches 500℃, the hardness of NM450HiTemp remains unchanged.
According to the change chart below, it can be clearly seen that NM450HiTemp is a high-temperature wear-resistant steel. The tensile strength of this product at 300℃-600℃ is significantly better than that of ordinary wear-resistant steel. At 500℃, the tensile strength is still 907MPa, which is 1.5 times that of the same level of wear-resistant steel. At 600℃, the tensile strength is 3 times that of NM450.
The change chart above shows:
The tensile strength of NM450HiTemp decreases relatively slowly after being kept at 300℃-500℃ for 48h. The tensile strength can still reach 1212MPa after being kept at 500℃ for 48h.
Tehnilised andmed:
|
TOOTE TÜÜP |
Kulumiskindel terasplekk |
|
terase klass |
NM300,NM300TP,NM360, NM400, NM400E,NM450,NM450E, NM500, NM550, NM500E,NM600,NM450HiTemp |
|
Standard |
GB, ASTM, JIS, DIN, ASTM |
|
LOHVI PAKSUS |
2mm-300mm |
|
LAIUS |
500-2500mm |
|
Pikkus |
1000mm-12000mm või vastavalt kliendi erisoovile |
|
Sallivus |
Paksus: +/- 0.02 mm, laius: +/- 2 mm |
|
Tarneaeg |
7-15 tööpäeva pärast 30% tagatisraha laekumist |
|
sertifikaat |
BV, SGS, CE, TUV |
|
Pakend |
Terasribaga kimp, konteinervedu |
NM450HiTemp Mechanical Property:
|
Terasest klass |
Yield strength （Typical）MPa |
Tensile strength（Typical）MPa |
Elongation（Typical）A50% |
Brinell Hardness（Typical）HBW |
Available specification ,mm |
|
NM450HiTemp |
≥1100 (1260) |
≥1300 (1540) |
≥7 (15.6) |
≥420 (456) |
3-25 * 1000-2050 |
Rakendused:
NM450HiTemp is mainly suitable for diamond heating rollers and recycled material heating rollers.
Toote pakkimine:
Kasutame igat liiki tarnete puhul kõige ohutumaid ja tõhusamaid pakkimisviise.
FAQ:
1.Q: Kui kaua saab tarnida?
V: Laotoodete puhul saadab saadetised 5–7 päeva jooksul pärast tagatisraha saamist; toodete puhul, mis vajavad tavaliste materjalide jaoks uut tootmist, teostage saadetised tavaliselt 10-15 päevaga; toodete jaoks on vaja uut tootmist spetsiaalsete ja haruldaste materjalide jaoks, tavaliselt kulub saatmiseks 20-30 päeva.
2.Q: Kas ma saan teie tehast külastada?
V: Muidugi, tere tulemast külastama meie tehast igal ajal.
3.K: Kus sa oled?
V: Anyang Henani provintsis.
4.Q: Millised sertifikaadid teie toodetel on?
V: Meil on ISO 9001, BV, SGS, CE, TUV ja muud sertifikaadid.
5.Q: Millised on teie maksetingimused?
A: 30% T/T sissemakse ette, 70% T/T saldo 5 päeva jooksul pärast B/L koopiat, 100%.Tühistamatu L/C nägemisel, 100% tühistamatu L/C pärast B/L 30-120 saamist päeva, O/A.
tag:
NM450HiTemp Wear Resistant Steel Plate, China Abrasion Resistant Steel Sheet Manufacturers, Suppliers, Factory, NM300Wear Resistant SteelSheet, NM360Wear Resistant SteelSheet, NM500Wear Resistant SteelSheet,High Wear Resistance And High Toughness,High Quality,NM600 kulumiskindel terasplaat,NM300TP,NM400,NM400E,NM450,NM450E,NM500,NM500E,NM360
